side view of the
aluminum idler
pulleys.
These were removed
after 10K miles.
You can see where my
belt tracked off center
on the left pulley.
.010 inch (.025 mm)
of wear at the edges.
|
Here's a side by
side view of the aluminum idler pulleys. These were removed
You can see where my
|
|
There is at least
.010 inch (.025 mm) of wear at the edges. |
Moss Motors replaced the above pulleys with
a newer design which is
anodized. We'll see if that change makes
them more durable.
October 2, 1999.